How to stop your Samsung washing machine vibrating and reduce noise

Wiki Article

A noisy, vibrating Samsung washing machine is often a sign of a simple fix. By following a few basic checks, you can usually solve the problem yourself before calling for service.

### ???? Initial Check: Is the Noise Normal?

Before diving into fixes, it's helpful to know that some noise from your Samsung washer is perfectly normal. For example, a humming sound during operation, or the metallic noise from zippers and buttons, is expected.

### ????️ A Six-Step Guide to a Quieter Machine

#### 1. Remove the Shipping Bolts

If your machine is brand new or has just been moved, this is the most likely culprit. These bolts secure the drum during transport and **must be removed before use**. Leaving them in will cause violent shaking and can cause permanent damage.

*   **How to fix it:** Unplug the machine and pull it away from the wall. Use the supplied spanner to loosen all bolts on the back (usually 3-5). Pull each bolt and its plastic spacer straight out. Finally, insert the supplied plastic bolt caps into the holes to prevent leaks and save the bolts in case you move home.

#### 2. Level the Machine on a Solid Floor

An uneven surface is a primary cause of vibration and noise. Your machine needs to be on a level, solid floor. Soft flooring like carpet can amplify movement.

*   **How to fix it:** Gently rock the washer from side to side to see if it's stable.

    *   **If it wobbles:** It's out of level. To raise a corner, turn the levelling foot counterclockwise. To lower it, turn it clockwise.

    *   **Final check:** Once the machine is stable and no longer rocks, tighten the locking nut flush against the machine's base to secure it. Check the manual for details if your model uses leg rings.

#### 3. Balance the Laundry Load

An unbalanced load is a very common cause of loud banging during the spin cycle.

*   **How to fix it:**

    *   Mix large and small items in a load to help them distribute evenly.

    *   Avoid washing only one heavy, water-absorbent item, like a bath mat or a duvet, on its own. The machine will struggle to balance it. Instead, add a few towels to help counterbalance the weight.

    *   If you hear a thumping noise, pause the cycle and manually redistribute the laundry inside the drum before restarting.

#### 4. Clear the Space and Check for Obstructions

The problem might be something simple, like a foreign object bouncing around.

*   **How to fix it:**

    *   Ensure the back and sides of the washer have at least 10cm of free space so it's not bumping against walls or other objects.

    *   Empty all pockets! Coins, keys, or bobby pins can cause rattling noises. If you hear such a sound, remove them from the drum or filter.

    *   Check the door seal (gasket) for any damage or dislodgement that could be rubbing against the spinning drum.

#### 5. Run the Calibration Mode

After leveling your machine and checking the load, it’s a good practice to run the "Calibration Mode". This tells the washer's internal sensors to re-learn how to detect an unbalanced load for a smooth spin.

*   **How to fix it:** This process varies by model. It typically involves pressing a combination of buttons (e.g., Temp and Delay End) while the machine is off. Consult your user manual for the exact steps for your specific model.

#### 6. Inspect Internal Components

If you've performed all the steps above and the problem remains, the issue might be mechanical.

*   **Worn shock absorbers:** These can wear out over time, causing the drum to shake excessively.

*   **Broken suspension springs:** A broken spring can cause knocking noises.

*   **Faulty drum bearings:** A deep, rhythmic rumbling during the spin cycle often signals worn bearings.

**Repairing these issues often requires disassembling the machine. It’s best to contact Samsung Support or a qualified technician to inspect and replace these parts safely.**

### ???? Extra Tip: The Anti-Vibration Pad

If your machine is on a wooden floor, you can consider using anti-vibration pads. These rubber mats go under each foot to help absorb some of the movement.